Setting Internet Linux Mint (Distro Keluarga Ubuntu) dengan Modem HP/Ponsel SE K800i
Setting internet Linux Mint 5 Elyssa (distro keluarga Ubuntu) dengan modem HP/ponsel Sony Ericsson K800i, dan pastikan GPRS operator kartu seluler kawan telah aktif. Berikut langkah-langkahnya:
1. Koneksikan kabel data USB HP ke komputer, pilih modus Telepon pada opsi sambungan
2. Buka aplikasi Terminal pada Linux Mint
3. Login sebagai root, ketik sudo su
zaldi@helter-skelter:~$ sudo su
[sudo] password for zaldi:
helter-skelter zaldi #
4. Untuk mendeteksi keberadaan HP k800i, ketik dmesg |grep usbcore
helter-skelter zaldi # dmesg |grep usbcore
[ 21.458858] usbcore: registered new interface driver usbfs
[ 21.458979] usbcore: registered new interface driver hub
[ 21.492664] usbcore: registered new device driver usb
[ 54.861084] usbcore: registered new interface driver usbserial
[ 54.861182] usbcore: registered new interface driver usbserial_generic
[ 981.696672] usbcore: registered new interface driver cdc_acm
[ 981.823292] usbcore: registered new interface driver cdc_ether
5. Untuk memeriksa HP k800i sebagai fungsi modem, ketik wvdialconf
helter-skelter zaldi # wvdialconf
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S2 S3
WvModem<*1>: Cannot get information for serial port.
ttyACM0<*1>: ATQ0 V1 E1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 Z -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyACM0<*1>: Modem Identifier: ATI -- Sony Ericsson K800
ttyACM0<*1>: Speed 4800: AT -- OK
ttyACM0<*1>: Speed 9600: AT -- OK
ttyACM0<*1>: Speed 19200: AT -- OK
ttyACM0<*1>: Speed 38400: AT -- OK
ttyACM0<*1>: Speed 57600: AT -- OK
ttyACM0<*1>: Speed 115200: AT -- OK
ttyACM0<*1>: Speed 230400: AT -- OK
ttyACM0<*1>: Speed 460800: AT -- OK
ttyACM0<*1>: Max speed is 460800; that should be safe.
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
WvModem<*1>: Cannot get information for serial port.
ttyACM1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyACM1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyACM1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Found an USB modem on /dev/ttyACM0.
Modem configuration written to /etc/wvdial.conf.
ttyACM0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
6. Konfigurasi dialer sesuai operator kartu yang digunakan, ketik gedit /etc/wvdial.conf
helter-skelter zaldi # gedit /etc/wvdial.conf
7. Muncul jendela baru, pasang dialer dibawah ini (contoh: operator Telkomsel dan untuk operator lain cukup setting yang berwarna merah), lalu klik Save untuk menutup jendela tadi
[Dialer telkomsel]
Modem = /dev/ttyACM0
Baud = 460800
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = at+cgdcont=1,"ip","telkomsel"
Modem Type = Analog Modem
ISDN = 0
Phone = *99***1#
Username = "wap"
Password = "wap123"
8. Untuk memulai koneksi internet, ketik wvdial telkomsel
helter-skelter zaldi # wvdial telkomsel
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: at+cgdcont=1,"ip","telkomsel"
at+cgdcont=1,"ip","telkomsel"
OK
--> Modem initialized.
--> Idle Seconds = 300, disabling automatic reconnect.
--> Sending: ATDT*99***1#
--> Waiting for carrier.
ATDT*99***1#
CONNECT
~[7f]}#@!}!}!} }9}#}%B#}%}(}"}'}"}"}&} } } } }%}&y`Wy1C~
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Thu Feb 18 21:23:09 2010
--> Pid of pppd: 6281
--> Using interface ppp0
--> local IP address 114.123.191.28
--> remote IP address 10.64.64.64
--> primary DNS address 114.127.253.84
--> secondary DNS address 202.3.210.11
9. Kini telah siap untuk browsing, update blog, atau berkelana didunia maya dengan rasa aman tanpa khawatir Virus
10. Untuk mengakhiri koneksi internet tekan Ctrl + C
Caught signal 2: Attempting to exit gracefully...
--> Terminating on signal 15
--> Connect time 13.4 minutes.
--> Disconnecting at Thu Feb 18 21:36:35 2010
helter-skelter zaldi #
Semoga bermanfaat..
Go Linux
1. Koneksikan kabel data USB HP ke komputer, pilih modus Telepon pada opsi sambungan
2. Buka aplikasi Terminal pada Linux Mint
3. Login sebagai root, ketik sudo su
zaldi@helter-skelter:~$ sudo su
[sudo] password for zaldi:
helter-skelter zaldi #
4. Untuk mendeteksi keberadaan HP k800i, ketik dmesg |grep usbcore
helter-skelter zaldi # dmesg |grep usbcore
[ 21.458858] usbcore: registered new interface driver usbfs
[ 21.458979] usbcore: registered new interface driver hub
[ 21.492664] usbcore: registered new device driver usb
[ 54.861084] usbcore: registered new interface driver usbserial
[ 54.861182] usbcore: registered new interface driver usbserial_generic
[ 981.696672] usbcore: registered new interface driver cdc_acm
[ 981.823292] usbcore: registered new interface driver cdc_ether
5. Untuk memeriksa HP k800i sebagai fungsi modem, ketik wvdialconf
helter-skelter zaldi # wvdialconf
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S2 S3
WvModem<*1>: Cannot get information for serial port.
ttyACM0<*1>: ATQ0 V1 E1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 Z -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyACM0<*1>: Modem Identifier: ATI -- Sony Ericsson K800
ttyACM0<*1>: Speed 4800: AT -- OK
ttyACM0<*1>: Speed 9600: AT -- OK
ttyACM0<*1>: Speed 19200: AT -- OK
ttyACM0<*1>: Speed 38400: AT -- OK
ttyACM0<*1>: Speed 57600: AT -- OK
ttyACM0<*1>: Speed 115200: AT -- OK
ttyACM0<*1>: Speed 230400: AT -- OK
ttyACM0<*1>: Speed 460800: AT -- OK
ttyACM0<*1>: Max speed is 460800; that should be safe.
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
WvModem<*1>: Cannot get information for serial port.
ttyACM1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyACM1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyACM1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Found an USB modem on /dev/ttyACM0.
Modem configuration written to /etc/wvdial.conf.
ttyACM0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
6. Konfigurasi dialer sesuai operator kartu yang digunakan, ketik gedit /etc/wvdial.conf
helter-skelter zaldi # gedit /etc/wvdial.conf
7. Muncul jendela baru, pasang dialer dibawah ini (contoh: operator Telkomsel dan untuk operator lain cukup setting yang berwarna merah), lalu klik Save untuk menutup jendela tadi
[Dialer telkomsel]
Modem = /dev/ttyACM0
Baud = 460800
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = at+cgdcont=1,"ip","telkomsel"
Modem Type = Analog Modem
ISDN = 0
Phone = *99***1#
Username = "wap"
Password = "wap123"
8. Untuk memulai koneksi internet, ketik wvdial telkomsel
helter-skelter zaldi # wvdial telkomsel
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: at+cgdcont=1,"ip","telkomsel"
at+cgdcont=1,"ip","telkomsel"
OK
--> Modem initialized.
--> Idle Seconds = 300, disabling automatic reconnect.
--> Sending: ATDT*99***1#
--> Waiting for carrier.
ATDT*99***1#
CONNECT
~[7f]}#@!}!}!} }9}#}%B#}%}(}"}'}"}"}&} } } } }%}&y`Wy1C~
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Thu Feb 18 21:23:09 2010
--> Pid of pppd: 6281
--> Using interface ppp0
--> local IP address 114.123.191.28
--> remote IP address 10.64.64.64
--> primary DNS address 114.127.253.84
--> secondary DNS address 202.3.210.11
9. Kini telah siap untuk browsing, update blog, atau berkelana didunia maya dengan rasa aman tanpa khawatir Virus
10. Untuk mengakhiri koneksi internet tekan Ctrl + C
Caught signal 2: Attempting to exit gracefully...
--> Terminating on signal 15
--> Connect time 13.4 minutes.
--> Disconnecting at Thu Feb 18 21:36:35 2010
helter-skelter zaldi #
Semoga bermanfaat..
Go Linux
kang... ikut baca sekalian mo ksh tahu ada award buwatmu jangan lupa ambil yaa.. ;)
BalasHapusTerima kasih teh Widi yang telah mengisi komentar dan juga memberikan awardnya. Saya pasang didepan ya teh..
BalasHapushal menarik dari linux adalah CLI (Command Line Interface), itu yang membuat pengguna linux berbeda dengan pengguna OS lain...sedikit ribet tp, banyak memberi manfaat. Nice blog.....:)
BalasHapusthanks bro buat info settingannya.
BalasHapuskeep post