Setting Internet Linux Mint (Distro Keluarga Ubuntu) dengan Modem HP/Ponsel SE K800i

Setting internet Linux Mint 5 Elyssa (distro keluarga Ubuntu) dengan modem HP/ponsel Sony Ericsson K800i, dan pastikan GPRS operator kartu seluler kawan telah aktif. Berikut langkah-langkahnya:

1. Koneksikan kabel data USB HP ke komputer, pilih modus Telepon pada opsi sambungan
2. Buka aplikasi Terminal pada Linux Mint


3. Login sebagai root, ketik sudo su

zaldi@helter-skelter:~$ sudo su
[sudo] password for zaldi:
helter-skelter zaldi #

4. Untuk mendeteksi keberadaan HP k800i, ketik dmesg |grep usbcore

helter-skelter zaldi # dmesg |grep usbcore
[ 21.458858] usbcore: registered new interface driver usbfs
[ 21.458979] usbcore: registered new interface driver hub
[ 21.492664] usbcore: registered new device driver usb
[ 54.861084] usbcore: registered new interface driver usbserial
[ 54.861182] usbcore: registered new interface driver usbserial_generic
[ 981.696672] usbcore: registered new interface driver cdc_acm
[ 981.823292] usbcore: registered new interface driver cdc_ether

5. Untuk memeriksa HP k800i sebagai fungsi modem, ketik wvdialconf

helter-skelter zaldi # wvdialconf
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S2 S3
WvModem<*1>: Cannot get information for serial port.
ttyACM0<*1>: ATQ0 V1 E1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 Z -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyACM0<*1>: Modem Identifier: ATI -- Sony Ericsson K800
ttyACM0<*1>: Speed 4800: AT -- OK
ttyACM0<*1>: Speed 9600: AT -- OK
ttyACM0<*1>: Speed 19200: AT -- OK
ttyACM0<*1>: Speed 38400: AT -- OK
ttyACM0<*1>: Speed 57600: AT -- OK
ttyACM0<*1>: Speed 115200: AT -- OK
ttyACM0<*1>: Speed 230400: AT -- OK
ttyACM0<*1>: Speed 460800: AT -- OK
ttyACM0<*1>: Max speed is 460800; that should be safe.
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
WvModem<*1>: Cannot get information for serial port.
ttyACM1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyACM1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyACM1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Found an USB modem on /dev/ttyACM0.
Modem configuration written to /etc/wvdial.conf.
ttyACM0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"

6. Konfigurasi dialer sesuai operator kartu yang digunakan, ketik gedit /etc/wvdial.conf

helter-skelter zaldi # gedit /etc/wvdial.conf

7. Muncul jendela baru, pasang dialer dibawah ini (contoh: operator Telkomsel dan untuk operator lain cukup setting yang berwarna merah), lalu klik Save untuk menutup jendela tadi

[Dialer telkomsel]
Modem = /dev/ttyACM0
Baud = 460800
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = at+cgdcont=1,"ip","telkomsel"
Modem Type = Analog Modem
ISDN = 0
Phone = *99***1#
Username = "wap"
Password = "wap123"

8. Untuk memulai koneksi internet, ketik wvdial telkomsel

helter-skelter zaldi # wvdial telkomsel
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: at+cgdcont=1,"ip","telkomsel"
at+cgdcont=1,"ip","telkomsel"
OK
--> Modem initialized.
--> Idle Seconds = 300, disabling automatic reconnect.
--> Sending: ATDT*99***1#
--> Waiting for carrier.
ATDT*99***1#
CONNECT
~[7f]}#@!}!}!} }9}#}%B#}%}(}"}'}"}"}&} } } } }%}&y`Wy1C~
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Thu Feb 18 21:23:09 2010
--> Pid of pppd: 6281
--> Using interface ppp0
--> local IP address 114.123.191.28
--> remote IP address 10.64.64.64
--> primary DNS address 114.127.253.84
--> secondary DNS address 202.3.210.11

9. Kini telah siap untuk browsing, update blog, atau berkelana didunia maya dengan rasa aman tanpa khawatir Virus
10. Untuk mengakhiri koneksi internet tekan Ctrl + C

Caught signal 2: Attempting to exit gracefully...
--> Terminating on signal 15
--> Connect time 13.4 minutes.
--> Disconnecting at Thu Feb 18 21:36:35 2010
helter-skelter zaldi #

Semoga bermanfaat..
Go Linux

Artikel Terkait

Pilih Label

• Blogger
• Linux
• Tips dan Trik
• Musik
• Live USB
• Sunda
• Android

Baca lagi